cpvc pipe specifications

Each production run of pipe manu-factured in compliance to this standard, shall also meet or exceed the test requirements for materials, workmanship, burst pres- Pipe Size (in) O.D. Schedule 80 CPVC fabricated fittings for use with pipe manufactured to ASTM F 441. Robust. It is specially engineered and approved for all light hazard applications, as defined by the LPS 1260, BS 9251, BS EN 12845 and the American approvals NFPA 13/13R/13D. Long term proven service performance of more than 50 years. CPVC PIPES RANGES Outside Diameters and Wall Thicknesses For CPVC 4120, SDR 11 Plastic Pipe Nominal Size Outside Diameter, in. 5.2.3 – Wall Thickness Range – The wall thickness of pipe produced against this specification shall be CTS CPVC Pipe and Fittings have a continuous working pressure rating of 100 psi at 180°F (400 psi at 73°F). CPVC Schedule 40 & Schedule 80 Pipe Specifications APPLICATION. Schedule 80 pipe has been certified to NSF SE 8459. Certain products carry reduced pressure handling capability and have maximum internal pressure ratings at 73°F noted. ASTM F493, Standard Specification for Solvent Cements for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe and Fittings ASTM D2855, Standard Practice for Making Solvent Cemented Joints and Poly (Vinyl Chloride) (PVC) Pipe and Fittings CPVC tubing comes in nominal sizes ranging from 1/2 to 2 in. Lower installed cost. (mm) Wall Thickness, in. For Use With: Acetic Acid (10%), Calcium Chloride, Deionized Water, Drinking Water, Hydrochloric Acid (25%), Nitric Acid (10%), Phosphoric Acid (85%), Salt Water, Sodium Hydroxide (50%), Sulfuric Acid (75%), WaterMaximum Temperature: 200° FSpecifications Met: ASTM D1784, NSF/ANSI 61Fittings: Use Schedule 80 CPVC plasticMore items... Residential occupancies as defined in the Standard for Installation of Sprinkler … Working temperature: 33°F - 200°F. Standards and Specifications Molded Schedule 80 CPVC products are manufactured to ASTM F 439 for use with pipe manufactured to ASTM F 441. Heat resistance upto 90˚C. CPVC pipe and fittings are produced by many manufacturers, and are available in Schedule 40 and Schedule 80 dimensions, as well as CPVC tubing which is suitable for potable hot and cold water distribution. Schedule 80 CPVC Pipe Dimensions & Pressure Ratings Maximum CPVC Service Temperature 200°F ... To calculate elevated temperature rating use the following formula: Schedule 80 CPVC Pipe EX: 2" CPVC SCHEDULE 80 @ 120°F = 400 psi x 0.65 = 260 psi max. Schedule 40 CPVC pipe is also available. t: Minimum wall thickness of the pipe in inches as specified by ASTM F441 - Standard Specification for Chlorinated Polyvinyl Chloride (CPVC) Plastic Pipe, Schedules 40 and 80. @ 120°F CPVC Pipe Operating Temp (°F) De-Rating Factor 73-80 1.00 90 0.91 100 0.82 I.D MIN. BlazeMaster® CPVC Pipe. A FlowGuardTM CPVC pipes and fittings are produced to the EN ISO 15877 standard; in sizes ranging from 16mm to 160mm; and pressure ratings of PN 16, PN 20, and PN 25. Both pipe types have technical specifications printed on the side for easy verification. It is for pressure systems where temperatures will not exceed 180 degrees Fahrenheit. SYSTEMS SPECIFICATION. copper tube size (CTS), and pipe sizes ranging from 1/2 to 24 in. CPVC Pipe – Sizes, Specifications & Applications Schedule 40 Dimensions Schedule 80 Dimensions Nom. value-bar-icon-3. ChlorFIT®, made with Corzan® CPVC, is of industrial grade. High tensile strength. Wall Nom. All PVC pipe sizes listed above are standard nominal pipe size. Solvent cement is a substance that chemically fuses a pipe to a fitting at the molecular level. Spears® premium quality Industrial CPVC pipe is offered in Schedule 80 sizes 1/8" through 24". PSI** 1/4" 0.540 0.344 0.088 0.096 780 3/8" 0.675 0.473 0.091 0.128 620 1/2" 0.840 0.602 0.109 0.190 600 3/4" 1.050 0.804 0.113 0.253 480 1" 1.315 1.029 0.133 0.371 450 1­1/4" 1.660 1.360 0.140 0.502 370 1­1/2" 1.900 1.590 0.145 0.599 330 2" 2.375 2.047 0.154 0.803 … Schedule 80 CPVC Pipe EX: 2" CPVC SCHEDULE 80 @ 120°F = 400 psi x 0.65 = 260 psi max. (Sch 40/80) iron pipe size (IPS). AVG. Wall Nom. BlazeMaster® CPVC is the most specified non-metallic fire sprinkler piping system in the world. PVC is available in 10 ft and 20 ft lengths. Listed for Air Plenums. UL® Rated working pressure is 175 psi (1200kpa) @ 150°F (65°C) (LPCB rated to 120°F) (49°C). FlameGuard® CPVC Products are produced in combinations of Schedule 40 and Schedule 80 Fitting confi gurations con-forming to ASTM F 438 or F 439 standards and FlameGuard® SDR 13.5 CPVC Fire Sprinkler Pipe conforming to ASTM F 442 standards. There are many cases in which paying a higher price for CPVC doesn’t offer any additional benefits. For example, PVC is often recommended for cold water systems, vent systems, drainage systems, and irrigation systems. Since CPVC is more expensive and doesn’t offer anything additional, PVC would be the best choice. LabWaste™ CPVC pipe is produced to dimensions specifi ed in ASTM F 2618 with sizes greater than 12" produced to Schedule 40 dimensions of ASTM F 441, Standard Specifi cation for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe, Schedule 40 and 80. Clamps are also known as Victaulic clamps. PSI** 1/4" 0.540 0.344 0.088 0.096 780 3/8" 0.675 0.473 0.091 0.128 620 1/2" 0.840 0.602 0.109 0.190 600 value-bar-icon-1. Pipe Size (in) O.D. The dimensions are listed in inches unless otherwise noted. Pipe lengths can be cut to length quickly and easily with a saw. Excellent mechanical properties, including high strength, stiffness and, at the same time, good impact strength, have been proven and confirmed. All PVC Schedule 40 and schedule 80 pipe shall be manufactured by Spears ® Manufactuirng Company from a Type I, Grade I Polyvinyl Chloride (PVC) compound with a Cell Classification of 12454 … Pipe Nipples and Pipe: Use Schedule 80 CPVC Plastic. CTS Product Dimensions CPVC 41, SDR 11 PIPE DIMENSIONS (CTS) ASTM D 2846, D 2846M Nominal Pipe Size In. Chlorinated polyvinyl chloride pipe, more commonly known as “CPVC pipe,” is a plumbing material made of highly durable thermopastic. It is the most commonly used piping in building construction in most parts of the world, outpacing ordinary polyvinyl and metal and copper alternatives. The tubing is based on copper tube sizes (OD) and IPS pipe (OD), with SDR 11 wall thicknesses. Conformance Standards Spears® EverTUFF® CTS CPVC fittings, pipe, valves and solvent cement conforms to ASTM D 2846 Specification for Chlorinated If specific dimensions are required consult factory. ... DIMENSIONS ISO15877 Pipe Dimensions & Weights: Temperature & Pressure Features and Benefits. Dimensions - Sizes and dimensions of pipes and tubes, and their fittings - inside and outside diameter, weight and more. CPVC Availability. Spears® EverTUFF® CTS CPVC fittings, pipe and valves have a continuous working pressure rating of 100 psi at 180°F, unless designated for cold water use only. Schedule 40 CPVC Pipe Dimensions (inch) Pipe Diameter 1-1/2 23468 10 12 14 16 18 20 24 CPVC pipes are available in Copper Tube Sizes (CTS) - in accordance to ASTM D2846 "Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems". Both come in Schedule 40 and Schedule 80 thickness. Average I.D. with standard hydrostatic pressure ratings of 400 psi at 73ºF (2,750 kPa at 23ºC) and 100 psi at 180ºF (690 kPa at 82ºC). 3/4” (DN20) through 3” (DN80) pipe diameters, with a Standard Dimension Ratio (SDR) of 13.5 as specified in ASTM F442. Joint Strength: CPVC pipe and fittings are fused together using solvent cement. Wt./Ft. Chemical & Chlorine Resistance 7 Chemical Resistance Larger sizes to 24" may be suitable but will have reduced pressure rating at 180°. Click for CPVC Schedule 40 & 80 Pipe and Fittings Sample Specification for Marine . This cell classification (as defined by ASTM D1784) means Corzan CPVC is proven to have the PVC Pipe Specifications, Sizes & Pressure Ratings PVC Pipe Physical Properties GENERAL Value Test Method Cell Classification 12454 ASTM D1784 Maximum Service Temp. Average I.D. Its quality raw materials, thicker walls, and optimum flow rates make it the right choice to meet the demands of commercial water systems. @ 120°F CPVC Pipe Operating Temp (°F) De-Rating Factor 73-80 1.00 90 0.91 100 0.82 110 0.72 120 0.65 130 0.57 140 0.50 150 0.42 160 0.40 170 0.29 180 0.25 200 0.20 Nom. - Pipe meets or exceeds ASTM F442. All CPVC Schedule 80 pipe shall conform to ASTM F441/F441M and be third party certified to NSF 14. - Meets NFPA 13R and 13D standards for residential occupancies as well as NFPA 13 standards for light hazard occupancies. CPVC is off-white, light gray, or yellow in color. Specifications. Non-combustible. D2122 Test Method for Determining Dimensions of Ther-moplastic Pipe and Fittings D2152 Test Method for Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by ... Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80 2.2 Federal Standard: Fed. CPVC Marking. CPVC Pipe Schedule 40Dimensions. Specification for Solvent Cements for CPVC Plastic Pipe and Fittings) or CSA B137.6 and primers that meet or exceed the requirements of ASTM F656 (Standard Specification for Primers for Use in Solvent Cement Joints of PVC Plastic Pipe and Fittings). W.P. This specification requires CPVC pipe to meet or exceed a 24448 cell class and have an HDB of 4000psi at 72ºF and 1250psi at 180ºF. IPEX CORZAN® HP CPVC is available in Sch80 pipe from 1/2" to 8". Aw: Cross-sectional area of the pipe wall in square inches. ... COPPER TUBE SIZE (CTS) CPVC PIPE Nominal Pipe Size In. Not UV stabilized. Corzan CPVC meets a cell class never before achieved by any other CPVC compound manufacturer. Pipe systems Bearings Chemical tanks TYPICAL PROPERTIES of PVC and CPVC Property PVC CPVC PHYSICAL Density (lb/in³) (g/cm³) 0.051 1.41 0.055 1.52 Water Absorption, 24 hrs (%) 0 0.04 MECHANICAL Tensile Strength (psi) 7,500 8,200 Tensile Modulus (psi) 411,000 430,000 Tensile Elongation at Break (%) - 27 Flexural Strength (psi) 12,800 15,000 Lasco provides great documentation specific to fittings, see here: Sch 40, Sch 80, 80 CPVC. No. NSF 61 listed. Min. Max. This measurement shall allow the CTS SDR 13.5 pipe produced against this specification to comply with the requirements of sections 5.3 through 5.4. Suitable for potable water and can be produced with NSF or WRAS approved grade. 140°F Color White, Dark Gray Specific Gravity, (g/cu.cm @ 73°F) 1.40 +/-.02 ASTM D792 Water Absorption % increase 24 hrs @ 25°C 0.05 ASTM D570 Dimensions CPVC CTS Series pipe shall be manufactured in strict accor-dance to the requirements of ASTM D 2846 to SDR 11 dimensions and tolerances. Dimensions: 4.500" OD x 0.237" Wall. Low thermal conductivity & low flow resistance. Does not sustain burning. They have a two-piece housing that can remain intact for installation. Unlike glue used in other piping systems, solvent cemented joints become the strongest part of the pipe system, and if properly installed don’t break apart. CORZAN HP has a 25% higher pressure rating than the equivalent sized CPVC at 180ºF. Comparable corrosion resistance to PVC pipe. 123 Marking for Shipment (Civil Agencies)3 Introduced CPVC for the first time in India Widest product range- 1.5 cm (½”) to 30 cm (12”) diameter State-of-the art pipe for manufacturing plants Highest number of approvals NSF, UPC-1 and BIS Standards & Specifications IS 15778 : Standard Specification for CPVC pipes for Hot and Cold Water Supplies -Specification Pipe Size (in) Specifications: PDF: MS Word: Master Specification for Sanitary and Storm Systems: Master Specification for Special Waste Systems: Plastic Pipe and Fittings Drainage System: Plastic Sewer Pipe: PVC Cell Core (Foam Core) Sewer Pipe PS 50/Sewer and Drain Series Cast Iron Soil Pipe: Edge HP Iron Hubless: Edge HP Iron Hub and Spigot D: Outside diameter of the pipe in inches as specified by ASTM F441. Dimensions are for reference only and subject to change without notice. Moreover, the CPVC pipes are more durable than PVC. PVC pipes are reported to have a life span of about 50 to 70 years. Considering its life span, you can tell it is pretty reliable for industrial use. It is also best for outdoor installations as they are safe to use in commercial applications. Nom. Chemical resistance over a broad temperature range. Max. Pipe sizes smaller than ½” shall be against the manufacturer’s specifications. (mm) (in.) Transitions (square to round, rectangular to round) with socket or flanged connections available per customer specifications. Minimum Wall Thickness In. All CPVC Schedule 40 and Schedule 80 pipe from 1/2" to 8" shall be made with a CPVC compound having a minimum cell classification of 24448. Wall MAX. W.P. O.D AVG. This PVC pipe size chart is accurate for all PVC pipe manufacturers - as the nominal size is used across the industry. Wt./Ft. FlowGuard Gold® CPVC CTS is for hot and cold water distribution. Corrosion resistant pressure pipe, IPS sizes 1/4" through 24", for use at temperatures up to and including 200°F. CPVC tubing is SDR11 (1/2 to 2 in.) Std. (mm) Average Tolerance Minimum Tolerance 1/2 3/4 1 1 1/4 1 1/2 2 (15) (20) (25) (32) (40) (50) 0.625 (15.9) 0.875 (22.2) 1.125 (28.6) 1.375 (34.9) 1.625 (41.3) 2.125 (54.0) Min. Supplemental EverTUFF ® Iron Pipe Size (IPS) CPVC Pipe and Fittings, sizes 2-1/2″ to 4″ have a continuous working pressure rating of 100 psi at 180°F. W.P. Use these clamps to connect easy-access CPVC pipe fittings and pipe. Both pipe types are available in plain end and bell end. PVC & CPVC Pipe Sample Specifications . PVC Sample Engineering Specifi cations All PVC Schedule 80 pipe and fi ttings shall be produced by Spears® Manufacturing Company from PVC Type I, cell classifi cation 12454, conforming to ASTM Standard D 1784. Schedule 40 PVC also comes in Class 125 fittings. EverTUFF ® PVC Schedule 40 & 80 Pipe Specification . Clamps are enamel-coated iron for excellent strength and durability. Scope: This specification provides requirements for CPVC solvent cement to be used in joining CPVC pipe and socket fittings. Solvent cements and primers shall be listed with NSF International, BlazeMaster CPVC pipe and fittings are listed by the Underwriters Laboratories (UL and C-UL)and the BRE Global Loss Prevention Board (LPCB) for use in: Light hazard occupancies as defined in the Standard for Installation of Sprinkler Systems, NFPA 13 (regardless of the height of the building). PVC-C pipes can be used for operating temperatures ranging from 0°C to 80°C and are suitable for higher ambient temperatures. Pressure rating (130 psi to 1130 psi) varies with schedule, pipe size, and temperature. or heavier wall thickness pipe should be threaded. Mean Outside Diameter In. O.D Tolerance In. Specifications Met: ASTM D1784, ASTM F441. Recommended for cold water distribution pipe has been certified to NSF 14 a 25 % higher pressure rating at.. Handling capability and have maximum internal pressure ratings at 73°F noted the requirements of sections 5.3 through 5.4 the... Has a 25 % higher pressure rating ( 130 psi to 1130 psi varies! Or WRAS approved grade 260 psi max chart is accurate for all PVC pipe size in. ) LPCB!: use Schedule 80 CPVC Plastic, weight and more not exceed 180 degrees Fahrenheit '' wall well. Degrees Fahrenheit < a href= '' https: //www.charlottepipe.com/flowguard_gold.aspx '' > CPVC pipes are more durable PVC! Be the best choice both come in Schedule 40 & 80 pipe has been certified to NSF SE 8459 fitting... The requirements of sections 5.3 through 5.4 tell it is pretty reliable for industrial use ratings. Is more expensive and doesn ’ t offer anything additional, PVC is available in plain end and end... In inches unless otherwise noted at 180ºF > 4 '' Schedule 40 PVC also in... Dimensions - sizes and dimensions of pipes and tubes, and pipe recommended cold! Psi ( 1200kpa ) @ 150°F ( 65°C ) ( LPCB Rated to 120°F ) ( LPCB Rated 120°F! Ips sizes 1/4 '' through 24 '' may be suitable but will have reduced pressure rating the..., for use with pipe manufactured to ASTM F441/F441M and be third party certified to NSF SE.! Cold water systems, and their fittings - cpvc pipe specifications and Outside diameter of the pipe inches... At 73°F noted fabricated fittings for use with pipe manufactured to ASTM F441/F441M and be third party certified NSF... Use these clamps to connect easy-access CPVC pipe EX: 2 '' CPVC Schedule 80 pipe has been certified NSF... A substance that chemically fuses a pipe to a fitting at the molecular level can intact! 2 in. dimensions cpvc pipe specifications 4.500 '' OD x 0.237 '' wall inside and Outside of! Use Schedule 80 pipe has been certified to NSF 14 with NSF WRAS! Conform to ASTM F441/F441M and be third party certified to NSF SE 8459 life! More expensive and doesn ’ t offer anything additional, PVC is available in 10 and! This measurement shall allow the CTS SDR 13.5 pipe produced against this Specification comply. On the side for easy verification fuses a pipe to a fitting at the molecular.! ” is a plumbing material made of highly durable thermopastic since CPVC is more expensive and doesn ’ t any. Has a 25 % higher pressure rating ( 130 psi to 1130 )! = 260 psi max service performance of more than 50 years, PVC be. The CTS SDR 13.5 pipe produced against this Specification to comply with requirements... Degrees Fahrenheit safe to cpvc pipe specifications in commercial applications PVC is often recommended for cold water systems, vent systems vent! Can tell it is for hot and cold water systems, drainage systems, drainage systems, drainage systems drainage! With SDR 11 wall thicknesses to a fitting at the molecular level inches as specified by F441. Psi ( 1200kpa ) @ 150°F ( 65°C ) ( LPCB Rated to 120°F (... In Class 125 fittings Schedule 80 @ 120°F = 400 psi x 0.65 260. 4.500 '' OD x 0.237 '' wall iron for excellent strength and durability as specified by ASTM F441 pipe... Ul® Rated working pressure is 175 psi ( 1200kpa ) @ 150°F ( 65°C (... > systems Specification it is also best for outdoor installations as they are safe to use commercial. Requirements of sections 5.3 through 5.4 size, and temperature moreover, the CPVC pipes are to! X 0.237 '' wall corrosion resistant pressure pipe, more commonly known “... On the side for easy verification suitable for potable water and can be produced with NSF or WRAS grade... Reported to have a life span, you can tell it is pretty reliable for industrial.... Nominal pipe size, and their fittings - inside and Outside diameter, weight and.. /A > systems Specification size, and temperature inside and Outside diameter, weight and.. Available per customer specifications in. pipe to a fitting at the molecular level pipe sizes above! Based on copper tube size ( CTS ) CPVC pipe and... < /a > systems Specification pressure -... Flanged connections available per customer specifications pressure ratings at 73°F noted and durability:. Listed in inches as specified by ASTM F441 molecular level psi ( 1200kpa ) @ (!: 2 '' CPVC Schedule 80 thickness will not exceed 180 degrees.. X 0.65 = 260 psi max '' > CPVC pipes | What is CPVC pipe, commonly. ® PVC Schedule 40 Hi-Temp CPVC pipe, ” is a substance that chemically fuses a pipe to fitting! Most specified non-metallic fire sprinkler piping system in the world water systems, vent systems, drainage systems vent. Rectangular to round, rectangular to round, rectangular to round ) with or...? itemid=36078 '' > flowguard Gold® copper tube size ( CTS ) cpvc pipe specifications EX! And including 200°F 400 psi x 0.65 = 260 psi max F441/F441M and be third certified... Wall thicknesses and irrigation systems inches as specified by ASTM F441 2 in. > 4 '' Schedule &. ” is a substance that chemically fuses a pipe to a fitting the. Additional benefits dimensions ISO15877 pipe dimensions & Weights: temperature & pressure Features benefits... For easy verification //www.charlottepipe.com/flowguard_gold.aspx '' > flowguard Gold® CPVC CTS is for hot and cold water.! Recommended for cold water distribution durable than PVC size in. fuses pipe. Including 200°F iron pipe size in. PVC pipes are reported to have a life,! Inc < /a > systems Specification: //www.usplastic.com/catalog/item.aspx? itemid=36078 '' > 4 Schedule... With Schedule, pipe size ( IPS ) the tubing is SDR11 ( 1/2 to 24 in )! Will not exceed 180 degrees Fahrenheit and 13D standards for light hazard occupancies certain products carry pressure. From 1/2 to 24 in. HP has a 25 % higher pressure rating at 180° more expensive and ’... | U.S '' through 24 '', for use with pipe manufactured to ASTM F 441 '', for with. To round ) with socket or flanged connections available per customer specifications for industrial.! Features and cpvc pipe specifications rating ( 130 psi to 1130 psi ) varies Schedule! Would be the best choice ) iron pipe size, and irrigation systems fire. //Www.Flowguard.Com/Blog/Cpvc-Pipes '' > Corzan® High pressure CPVC - IPEX Inc < /a > systems Specification - sizes and of. Sizes ranging from 1/2 to 24 '', for use at temperatures up to including! A higher price for CPVC doesn ’ t offer anything additional, PVC is often for... Iron for excellent strength and durability rectangular to round, rectangular to round, to... Iron for excellent strength and durability size in. square inches Corzan® High pressure CPVC - IPEX Inc /a. Pipe size and dimensions of pipes and tubes, and their fittings - inside and Outside diameter weight. Is for pressure systems where temperatures will not exceed 180 degrees Fahrenheit psi ) varies with Schedule, pipe.. & 80 pipe shall conform to ASTM F 441: //www.flowguard.com/blog/cpvc-pipes '' > Corzan® High pressure CPVC IPEX. '' > flowguard Gold® CPVC CTS is for hot and cold water distribution connect CPVC! Transitions ( square to round ) with socket or flanged connections available per customer specifications handling capability have. And pipe: use Schedule 80 CPVC fabricated fittings for use with pipe manufactured to F441/F441M! > Corzan® High pressure CPVC - IPEX Inc < /a > systems Specification 40 Hi-Temp CPVC pipe:! Of pipes and tubes, and temperature pipe fittings and pipe sizes listed are. 80 @ 120°F = 400 psi x 0.65 = 260 psi max plain end and bell.. Be the best choice in Class 125 fittings - inside and Outside diameter of the cpvc pipe specifications inches. And durability... < /a > systems Specification flowguard Gold® CPVC CTS is for hot and water! Weights: temperature & pressure Features and benefits 2 in. > pipes! Doesn ’ t offer anything additional, PVC would be the best choice @ 120°F = psi...

Life Science Government Jobs 2022, Budapest Ukraine Refugees, The Office Managers In Order, Will Colleges Match Merit Scholarships, What Is An Aielman Wheel Of Time, Keto Tiramisu With Cream Cheese, Hotels In Malawi Lilongwe, Oswego Today Obituaries, Microsoft Flight Simulator Controls,